Doka 582778000 Original Operating Instructions - Page 2

Browse online or download pdf Original Operating Instructions for Industrial Equipment Doka 582778000. Doka 582778000 6 pages. Shifting carriage tg

Print Page

Basic drawings of product

The Shifting carriage TG comes with 3 swivel casters

(ø20.0 cm), 2 of which have an integral parking brake.

582778000-2

a ... 1480 mm

b ... 190 mm to 950 mm

c ... 984 mm

d ... 1280 mm

e ... 1520 mm

f ... 270 mm

Data on rating plate

Doka Industrie Gmbh, A-3300 Amstetten

Designation: Shifting carriage TG

Max. load: 1000 kg

Dead weight: 168.0 kg

Art.n°: 582778000

Year of manufacture: see rating plate

Use for the designated purpose

only:

The Shifting carriage TG is a lifting appliance. It may

only be used for erecting, striking, and horizontal trav-

elling of Doka load-bearing towers Aluxo, Staxo and d2.

Max. capacity: 1000 kg per carriage

It is forbidden to use the product for anything

but its intended purpose!

Doka accepts no liability for products that

have been altered!

Repairs may only be carried out by the man-

ufacturer!

Store lifting accessories in a dry and well

ventilated place, protected from the weather

and from all corrosive substances.

Load-carrying equipment must be inspected

once a year by an expert.

The Formwork Experts

Before every use

After taking delivery of the Shifting

carriage TG

Damage in transit

The Shifting carriage TG is given thorough inspection

and testing before being dispatched from the manufac-

turer's factory. In order to make sure that no damage

has occurred in transit, the Shifting carriage TG should

be inspected thoroughly as soon as it is delivered. Any

damage must be reported to the sender in writing. Until

this notice of defect has been dealt with, the Shifting

carriage TG may not be put into service.

Warranty conditions

The warranty shall lapse in the event of overloading or

other improper use of the equipment.

Familiarising personnel with the

Operating Instructions and the

required guidelines

Operator authorisation

The only persons allowed to operate the equipment are

those who have been given sufficient instruction in how

to use it, and who are familiar with all applicable oper-

ating manuals and regulations.

The client must obtain suitable evidence of the person-

nel's ability to operate and handle this vehicle.

Please also observe the VDMA guidelines on proper

use of industrial trucks for their designated purpose.

Original Operating Instructions Shifting carriage TG

Check for any signs of damage or visible deforma-

tion.

Any deformed and damaged parts must be

immediately replaced by an expert. For safety

reasons, only genuine OEM spares may be

used.

Crack-free and notch-free welds

No deformation

Rating plate must be in place and clearly

legible

999260002 - 03/2011