CYP CMPRO-U4H4CVPL Operation Manual - Page 8

Browse online or download pdf Operation Manual for Matrix Switcher CYP CMPRO-U4H4CVPL. CYP CMPRO-U4H4CVPL 20 pages. 4k2k 4×4 hdmi matrix over cat5e/6/7

Print Page
CYP CMPRO-U4H4CVPL Operation Manual

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

4X4 HDMI MATRIX
OVER CAT5e/6/7
1
LCM: Displays the setting information of each input and output
setting.
2
IR: IR Receiver window (accepts the remote control signal of this
device only).
3
POWER: Press this button to power the device on/off. The LED will
illuminate green when the power is on, red when it is in 'Standby'
mode.
4
LOCK: Press this button to lock all the buttons on the panel; press
again to unlock. The LED will illuminate when locked.
5
MENU: Press this button to access the LCM menu system, from
here EDID settings can be managed and IP system settings are
displayed.
6
A~D/1~4 and OUT/IN: Press the OUT or IN button to select the
output or input mode and then press the required number button
to make the selection accordingly.
For example, if outputs A~B need to be set to input 1 and outputs
C~D need to be set to input 2, then the following sequence of
button presses need to be performed:
Press: OUTABIN1MENU,
and then press: OUTCDIN2MENU.
Note: If the MENU button is not pressed the selection will not be
changed.
3
1
2
POWER
LOCK
MENU
OUT
IN
3
4
5
A/1
B/2
C/3
D/4
6