CYP CMSI-8H8CV Operation Manual - Page 9

Browse online or download pdf Operation Manual for Matrix Switcher CYP CMSI-8H8CV. CYP CMSI-8H8CV 20 pages. Hdbaset 4x4/8x8 hdmi matrix over cat5e/6/7
Also for CYP CMSI-8H8CV: Operation Manual (20 pages)

Print Page
CYP CMSI-8H8CV Operation Manual

6.2 Rear Panel

3
6
ALL
A
IR OUT
IR OUT
CAT5e/6 OUT
IR IN
IR IN
HDMI IN
1
2
4
5
8
1
CONTROL: This port is the link for Telnet control, connect to an active
Ethernet link with an RJ45 terminated cable (for further details, please
refer to section 6.8).
Warning: Please do not connect this port directly to the PC/Laptop as the
Telnet function will not work.
2
RS-232: Connect to a PC or control system with D-Sub 9-pin cable
for the transmission of RS-232 commands.
3
ALL IR OUT: Connect to the IR blaster for IR signal transmission of the
source or display equipment. Place the IR blaster in direct line-of-
sight of the equipment to be controlled.
4
ALL IR IN: Connect to the R extender for IR signal reception of the
remote control of this device or the source and display equipment.
Ensure that remote being used is within the direct line-of-sight of
the IR extender.
5
SERVICE: Manufacturer use only.
6
IR OUT A~H: Connect to the IR blasters for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be
controlled.
7
IR IN 1~8: Connect to the IR extenders for IR signal reception. Ensure
that the remote being used is within the direct line-of-sight of the IR
extender.
8
CAT5e/6/7 OUT A~H: Connect from these CAT outputs to the CAT
input port of the receiver units with a single CAT5e/6/7 cable for HDMI
Audio/Video and IR/RS-232 control signal transmission.
9
HDMI IN 1~8: Connect to the HDMI input source devices such as a
DVD player or a Set-top Box with HDMI cable or DVI to HDMI cable.
10
DC 24V: Plug the 24 V DC power supply into the unit and connect the
adaptor to an AC outlet.
11
PoE 24V: Plug the 24 V PoE power supply into the unit and connect
the adaptor to an AC outlet. This unit will mainly power PoE (Power
over Ethernet) capaable receiver units.
B
C
IR OUT
IR OUT
IR OUT
CAT5e/6 OUT
CAT5e/6 OUT
IR IN
IR IN
1
2
3
HDMI IN
HDMI IN
D
E
F
IR OUT
IR OUT
CAT5e/6 OUT
CAT5e/6 OUT
CAT5e/6 OUT
IR IN
IR IN
IR IN
4
5
HDMI IN
HDMI IN
9
7
G
H
IR OUT
IR OUT
CAT5e/6 OUT
CAT5e/6 OUT
IR IN
IR IN
6
7
8
HDMI IN
HDMI IN
HDMI IN
GND
GND
2
1
4
3
V+
+
V
GND
POE 24V
MAIN 24V
10
11
4