CYP OR-HD88HC Operation Manual - Page 9

Browse online or download pdf Operation Manual for Matrix Switcher CYP OR-HD88HC. CYP OR-HD88HC 20 pages. V1.4 hdmi 8 x 8 matrix switcher with simultaneous hdmi & cat outputs

CYP OR-HD88HC Operation Manual

6.2 Rear Panel

3
5
6
OUTPUT A
DDC
IR
HDMI
VIDEO
IR IN
1
HDMI IN
1
2
4
7
1
LAN: Reserved.
2
RS-232: Connect to a PC or laptop with D-Sub 9-pin female cable for
the transmission of RS-232 commands.
3
IR IN: This slot is to connect with the IR extender included in the package
for IR signal receiving from the remote control of this device and the
source and display equipments.
4
SERVICE: This slot is to connect with mini USB-B type cable for firmware
update only.
5
IR OUTPUT A~H: Connect the supplied IR blasters (included in the
package) for IR signal transmission.
6
DDC/VIDEO OUTPUT A~H: Connect to the Receiver units with CAT6
cables from the Receiver for HDMI Audio/Video and IR/RS232 control.
7
HDMI OUTPUT A~H: These slots are to connect to the output display for
simutaneouse output image with CAT6 cables.
8
HDMI INPUT 1~8: Connect to the HDMI input source equipment such
as DVD player or Set-top Box with HDMI cable or DVI to HDMI converter
cable.
9
DC 24V Main Power: This slot is where user connect the 24V DC power
adaptor included in the package and plug the adaptor to an AC wall
outlet for power supply, for powering the main unit.
OUTPUT B
OUTPUT C
OUTPUT D
DDC
DDC
IR
IR
IR
HDMI
VIDEO
HDMI
VIDEO
HDMI
2
3
4
HDMI IN
HDMI IN
HDMI IN
OUTPUT E
OUTPUT F
DDC
DDC
DDC
IR
IR
VIDEO
HDMI
VIDEO
HDMI
VIDEO
5
6
HDMI IN
HDMI IN
8
OUTPUT G
OUTPUT H
DDC
DDC
IR
IR
HDMI
VIDEO
HDMI
VIDEO
GND
GND
2
1
4
3
V+
+
V
GND
7
8
DC 24V
HDMI IN
HDMI IN
9
9