CYP CMSI-424E Operation Manual - Page 14

Browse online or download pdf Operation Manual for Switch CYP CMSI-424E. CYP CMSI-424E 20 pages. Hdbaset 4×4 hdmi matrix over 4 cat5e/6/7 with 2 hdmi outputs

Print Page

Once in the Command Line Interface (CLI) type 'telnet' along with the

IP address of the unit you wish to control and '23' then hit Enter (see

below for reference). This will bring us into the device which we wish to

control.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice.

Type 'HELP' to list the available commands (see below for reference).

Type 'IPCONFIG' To show all IP configurations. To reset the IP, type

'RSTIP' and to use a set static IP, type 'SETIP'.

Note:

All commands will not be executed unless followed by a carriage

return. Commands are case-insensitive.

If the IP is changed then the IP Address required for Telnet/

WebGUI access will also needs to be changed accordingly.