Ashdown AAA-30-8 User Manual - Page 4

Browse online or download pdf User Manual for Amplifier Ashdown AAA-30-8. Ashdown AAA-30-8 6 pages.

Print Page

Headhopnes

A headphone jack socket is provided (located on the front of the AAA-30

& AAA-60 and on the rear of the others) to allow stereo headphones to be

plugged into the amplifier for silent practice. Just use the speaker mute switch

located on the rear of the amp.

LINE IN

A single balanced line input is provided (located on the front of the AAA-30 &

AAA-60 and on the rear of the others) for play along practice. Used in conjunc-

tion with the Headphones socket for silent practice (Also see, AUX MIX).

AUX MIX

Set the level of your Backing Track by using the 'AUX MIX' Rotary control

provided.

MASTER

Use the output level control to adjust the playing volume of the amplifier.

REAR PANEL FACILITIES:

There is a balanced post EQ Di fitted to all models expect the AAA-30, This

provides a balanced out put for connecting to a PA or for recording purposes.

This is located on the rear on the AAA-120 & AAA-300 and on the top panel of

the AAA-60.

FX Send & Return

On the AAA-120 & AAA-300 models there is an FX loop fitted for use with FX

pedals, a send and return is provided.

Speaker & Tweeter Mute

There is a speaker mute switch fitted to all models for use in silent practice.

On the AAA-120 and AAA-300 there is also a tweeter mute switch to cut the

tweeter if desired.

Speaker Out

There is an 8Ohm min load speaker out put located on the rear of the AAA-60

and also the AAA-300 for use with an 8 Ohm extension speaker only.

Fused mains inlet socket

This is for connection of the unit to your countries mains power supply. Please

ensure that the type and rating of mains fuse marked on the rear panel is used

when this is replaced.

Power switch

The power to the unit is turned on with the rear panel power switch. A power

led on the front panel will light to indicate that the amplifier is switched on.

SPECIFICATION:

AAA-30-8

Output Power

30watts rms into 8 ohms

Speaker Unit

1 x 8" Ashdown Driver

Input Impedance

1 Meg ohm

Input Signal Range 100Mv to 10v

E.Q.

Passive Bass, Middle, Treble.

AAA-60-10T

Output Power

60watts rms into 8 ohms

Speaker Unit

1 x 10" Ashdown Driver & Tweeter

Input Impedance

1 Meg ohm

Input Signal Range 100Mv to 10v

E.Q.

Passive Bass, Middle, Treble.

AAA-120-15T

Output Power

120watts rms into 8 ohms

Speaker Unit

1 x 15" Ashdown Driver & Tweeter

Input Impedance

1 Meg ohm

Input Signal Range 100Mv to 10v

E.Q.

Bass, Hi-Mid, Lo-Mid, Treble & Variable Mid Sweep

AAA-300-210T

Output Power

300watts rms into 8 ohms

Speaker Unit

2 x 10" Ashdown Driver & Tweeter

Input Impedance

1 Meg ohm

Input Signal Range 100Mv to 10v

E.Q.

Bass, Hi-Mid, Lo-Mid, Treble & Variable Mid Sweep