3M Breathe Easy Turbo Operational Manualline - Page 3

Browse online or download pdf Operational Manualline for Respiratory Product 3M Breathe Easy Turbo. 3M Breathe Easy Turbo 5 pages.

Cartridge selection and attachment:
Remove three filters/cartridges from their packaging and verify that they are the
appropriate type for the application by examining the label attached to the
filter/cartridge housing.
For gross decontamination of patients use FR-57 cartridge # 453-03-02 from 3M.
Remove screw caps from each filter/cartridge and retain them for future use.
Ensure that the air inlet insert is seated inside each of the three rubber air inlets on
the Turbo unit and that the threads and sealing surfaces are free of dirt and debris.
Screw a filter/cartridge loosely into each of the three threaded inlets. When all
three filters/cartridges are in place, hand-tighten them so that an airtight seal is
achieved between the neck of each filter/cartridge and the rubber molding inside
the threaded inlet. Dispose of used filters/cartridges in accordance with
applicable regulations.
Cleaning of equipment:
1. Surface clean the Turbo Unit at the end of the shift unit after each use by using a
damp sponge soaked in an approved cleaning solution to wipe the exterior
surfaces of the filter/motor-blower assembly, the breathing tube, the battery pack,
and the support belt. Allow them to air dry.
2. Surface clean the outside of the head cover with a disinfectant before storing at
the end of the shift. Allow to air dry.
Preventive Maintenance:
Battery recharging: The black and yellow (standard) batteries can remain on the charger
indefinitely since this charger has a trickle charge feature
Monthly PAPR inspections: Inspect the 3m Breathe Easy respirators using the 3M
Breathe Easy Turbo PAPR Assembly Monthly Inspection Checklist.
Page 3 of 5; 3M Breathe Easy Turbo PAPR; 6/15/06