CYP CH-507RXWP Operation Manual - Page 8
Browse online or download pdf Operation Manual for Receiver CYP CH-507RXWP. CYP CH-507RXWP 16 pages. Hdmi over single cat5e/6/7 wall-plate receiver
Also for CYP CH-507RXWP: Operation Manual (16 pages)
Print Page
6. OPERATION CONTROLS AND FUNCTIONS
1
IR 1 Digital Eye: This slot is to connect with the IR receiver cable
included in the package for IR signal receiving.
2
IR 2 Emitter: This slot is to connect with the IR blaster cableincluded
in the package for IR signal transmitting.
3
RS-232 OUT: This slot is to connect with D-Sub 9-pin cable from
device equipment for receiving RS-232 commands.
4
LAN: Connect to an active network for LAN serving and Tlenet/
Web GUI control.
When the transmitter or any compatible LAN equipped receivers
are connected to a network, this allows the network access
(including internet access if available) to be shared between the
transmitter and all connected receivers. Connect any Ethernet
equipped device e.g. a Smart TV or games console to the LAN
port of a receiver for that device to share the network/internet
access.
5
HDMI OUT: This slot is to connect with HDMI TV/monitor for display
HDMI input source signal.
6
Power LED: This green LED will illuminate when the device is
connected to a power supply.
7
LINK LED: This yellow LED will illuminate when the both CAT5e/6
input and output signal is connected.
3
1
IR 1 Digital Eye
IR 2 Emitter
RS-232
OUT
2
3
LAN
HDMI OUT
4
5
LINK
POWER
6
7