CYP PU-607BD-TX Operation Manual - Page 7
Browse online or download pdf Operation Manual for Receiver CYP PU-607BD-TX. CYP PU-607BD-TX 14 pages. Hdmi over single cat5e/6/7 hdbaset - bi-directional poc receiver (full 5play & single lan up to 100m)
Also for CYP PU-607BD-TX: Operation Manual (16 pages)
Print Page
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Front
HDMI In
1
2
HDMI In: Connect to HDMI source equipment such as a DVD or Blu-
1
ray player.
2
LAN: Connect to an internet or network connection.
3
RS-232 In: Connect to a PC or laptop with D-Sub 9 pin male cable
for the transmission of RS-232 commands.
4
Power LED: This blue LED will illuminate when the device is
connected to a power supply.
5
DC 24V: Plug the 24 V DC power supply into the unit and connect
the adaptor to an AC outlet. Only one side of power needs to be
connected to activate both transmitter and receiver.
IR 1 Blaster: Connect to the supplied IR blaster cable for IR signal
6
transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.
7
IR 2 Extender: Connect to the supplied IR receiver cables for IR
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR extender.
8
Link LED: The yellow LED will illuminate when both the input and
output signals are connected.
9
CAT5e/6 Out: Connect to the reciever unit with a Single CAT5e/6
cable for tranmission of all data signals.
3
Transmitter
RS-232 In
HDMI to CAT5e/6 with LAN/IR/RS232
3
Rear
IR1 Blaster
Power
DC 24V
IR2 Extender
4
5
6
7
8
9