CYP CH-1109TXC Operation Manual - Page 8

Browse online or download pdf Operation Manual for Extender CYP CH-1109TXC. CYP CH-1109TXC 18 pages. Hdmi to cat5e/6 with lan/poe/ir extender
Also for CYP CH-1109TXC: Operation Manual (13 pages)

Print Page
CYP CH-1109TXC Operation Manual

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter

Front
DC 24V
Power
IR 1
IR 2
Blaster
Extender
1
2
3
4
Power LED
1
The red LED will illuminate when the 24 V DC Adaptor is connected
to the AC outlet.
DC 24V
2
This slot is where you plug the 24 V DC power supply into the unit
and connect the adaptor to an AC outlet.
IR 1 Blaster
3
Connect the IR blaster cables included in the package for IR signal
transmission.
IR 2 Extender
4
These slots are to connect with the IR receiver cables included in
the package for IR signal reception.
5
RS-232 In
This slot is to connect with PC/laptop with D-Sub 9-pin male cable
for sending RS-232 commands.
6
Link LED
This yellow LED will illuminate when the both CAT5e/6 input and
output signals are connected.
CAT5e/6 Out
7
Connect the transmitter and receiver via a single CAT5e/6 type
cable for all data transmission.
HDMI Bypass
8
Connect to a HDMI TV/monitor for instant display of the HDMI input
source signal.
8
Link
RS232 In
CAT5e/6 Out
7
5
6
Rear
HDMI
HDMI In
Bypass
LAN 1
8
9
10
LAN 2
LAN 3
10
10