CYP CH-507TXWPUS Operation Manual - Page 8
Browse online or download pdf Operation Manual for Extender CYP CH-507TXWPUS. CYP CH-507TXWPUS 12 pages. Hdmi over cat5e/6/7 wall-plate transmitter with ir/rs232/lan/poe
Also for CYP CH-507TXWPUS: Operation Manual (16 pages)
Print Page
2
RS-232 IN: This slot is connect with D-Sub 9-pin cable from PC/
Laptop device RS-232 commands sending.
3
DC 24V: Connect the power adaptor included in the package
and then connect to AC power to activate the device..
4
POWER LED: This LED will illuminate when the device is connected
to a power supply.
5
LINK LED: This LED will illuminate when the both CAT5e/6/7 input
and output signal is connected.
6
IR 2 Extender: This slot is to connect with the IR Receiver cable
included in the package for IR signal receiving.
IR 1 Blaster: This slot is to connect with the IR Blaster cable included
7
in the package for IR signal transmitting.
8
HDMI IN: This slot is to connect with HDMI source equipment such
as DVD/Blu-ray player with HDMI source signal.
6.2 Rear Panel
1
CAT5e/6/7 OUT: Connect to CAT5e/6/7 to HDMI Receiver for signal
extending.
6.3 RS-232 Pin Definitions
3
Pin
1
2
3
4
5
6
7
8
9
Define TX/RX
N/C
TxD/RxD
RxD/TxD
N/C
GND
N/C
N/C
N/C
N/C