Ashford KIWI 2 SPINNING WHEEL Manual - Page 12

Browse online or download pdf Manual for Weaving Tools & Accessories Ashford KIWI 2 SPINNING WHEEL. Ashford KIWI 2 SPINNING WHEEL 13 pages.
Also for Ashford KIWI 2 SPINNING WHEEL: Instructions Manual (13 pages)

Print Page
Ashford KIWI 2 SPINNING WHEEL Manual
35cm (13¾")
Insert the end of the flyer shaft into the rear flyer bearing and click the flyer orifice into the front flyer
bearing.
Tie the nylon brake band to spring
. Thread the nylon brake band through the eye and tie spring
35cm (13 ¾") from spring
, then cut the surplus nylon off and tie it to the other end of spring
.
Take the nylon brake band up and over the groove in the bobbin and place spring
onto the hook.
Insert the tension knob into the maiden bar, thread the end of the nylon brake band through the hole in
the tension knob and tie a knot. Turn the tension knob to wind on excess nylon.
Take care not to over-stretch the springs.