CYP CLUX-18EU Operation Manual - Page 9

Browse online or download pdf Operation Manual for Cables and connectors CYP CLUX-18EU. CYP CLUX-18EU 12 pages. 1 by 8 hdmi v1.3 splitter
Also for CYP CLUX-18EU: Operation Manual (12 pages)

Print Page

6.2 Rear Panel

SERVICE ONLY

USB

For software update only.

HDMI OUT 5/6/7/8

HDMI equipped displays connected to these slots will display the

same content that is input from the HDMI IN slot.

SYS Reset ON/OFF

This switch allows user to perform a system reset. The default setting

is OFF, leave as is when in normal use. When switched ON, the unit

will perform a system reset every 8~10 minutes, in order to perform

this function the displays must have CEC support. When performed

successfully, the unit will automatically switch the displays to the

HDMI 1 input.

NOTE: For the system reset function to work will not affect displays

that are not CEC compatible.

EDID Control switch

This EDID control switch determines if you are going to use the

EDID from the display attached to output 1 or use an onboard

EDID. When TV is selected, the EDID will attach to output 1 and

will accept a 3D signal input to display on the 3D TV. When STD is

selected, the EDID will become onboard EDID. The factory default

setting is TV mode.

Power

Plug the 5 V DC power supply into the unit and connect the

adaptor to AC wall outlet.