CYP AU-A300 Operation Manual - Page 9
Browse online or download pdf Operation Manual for Amplifier CYP AU-A300. CYP AU-A300 16 pages. Integrated 2 channel zone amplifier
Print Page6.2 Rear Panel
3
CONTROL
IR IN
HDMI OUT
1
2
1
IP CONTROL: Connect to an active network with RJ-45 cable for telnet
control.
2
HDMI OUT: Connect to HDTV/monitor for both audio and video
display.
3
IR IN: Connect the IR receiver included in the package for receiving
the IR signal from the device's remote control.
4
HDMI IN 1& 2: Connect to HDMI source equipment such as a Set-top
Box or Blu-ray player.
5
RS-232: Connect to a PC/Laptop or control system with D-Sub 15pin
cable for RS-232 control.
6
LINE IN: Connect to an audio source with 3.5mm mini-jack cable for
stereo audio signal input.
7
OPT. & COAX. OUT: Digital audio output. Connect to additional
amplifiers or active speakers.
8
OPT. & COAX. IN: Connect to source equipment such as a Set-top-box
or games console with an optical or coaxial digital output.
9
R/L SPEAKER: Connect to speakers with standard speaker cable.
10
R/L IN: Connect to audio source equipment with an RCA cable for
analogue stereo audio input.
11
R/L OUT: Connect L/R output to active speakers or an additional
AU-A300 with an RCA cable for analogue stereo audio output.
12
DC 24V: Connect the 24V DC power supply to the unit and plug the
adaptor into an AC outlet.
5
6
LINE IN
RS-232
OPT.
HDMI IN 1
HDMI IN 2
OPT.
4
8
10
RCA
IN
R
L
IN
IN
COAX.
SPEAKER
-
OUT
OUT
COAX.
+
R
7
11
DC 24V
OUT
R
R
L
-
+
L
9
12
9