DOLD SAFEMASTER M Safety Technique

Browse online or download pdf Safety Technique for I/O Systems DOLD SAFEMASTER M. DOLD SAFEMASTER M 12 pages. Multi-function safety system

Print Page
Safety Technique
Multi-Function Safety System SAFEMASTER M
Input Module
BG 5913.08/_2 _ _ _
Block Diagram
output
start-button
assignment
assignment
en1
function management
(-)
X1 S44 S42 S34 S32 S24 S22 S14 S12 X2 (-)
Circuit Diagram
48
X1
S12 S14 S22 S24
A1+
48
S12
S14 S22
S24 S32 S34 S42 S44
(-)
X1
A1+
58
S32 S34 S42 S44
58
X2
All data in this list are in correspondence with the technical equipment used at the time of this
version. We reserve the right to implement technical improvements and changes at any time.
M8752_a
PTC
en2
run1
run2
48 58
(-)
(-)
X2
M8741
(-)
• According to
- Performance Level (PL) e and category 4 to EN ISO 13849-1: 2008
- SIL Claimed Level (SIL CL) 3 to IEC/EN 62061
- Safety Integrity Level (SIL 3) to IEC/EN 61508
• Input module for combination of 4 of the following functions to be set
via rotary switch:
- safety gate monitoring function (2 x 2 changeover contacts)
- Light curtain (LC type 4) with manual or automatic start
- Emergency stop (2-channel) with manual or automatic start
- Two-hand controls type IIIC acc. to DIN/EN 574
• Functions can be selected via rotary switches
• 8 inputs for safety sensors
• Broken wire and short circuit monitoring function with error indication
• 2 semiconductor outputs for status indication
• LEDs for status indication
• Width: 22.5 mm
Approvals and Markings
Applications
Realization of fail-safe control circuits for protection of people and machinery.
Note: This module is intended for applications in which mixed safety
functions affect one common output.
Further input modules with other combinations of functions are provided
(e.g. BG 5913.08/_0_ _ _, BG 5913.08/_1_ _ _ , BG 5913.08/_3_ _ _,
BG 5914.08/_0_ _ _, BH 5914.08/_0_ _ _, BG 5914.08/_1_ _ _,
BG 5915/_1_ _ _ or BH 5915.08/_1_ _ _).
General Information SAFEMASTER M
The maximum configuration of the SAFEMASTER M multi-function safety
system is as follows:
• the control unit BH 5911
• up to 3 input modules BG/BH 5913, or BG/BH 5914, BG/BH 5915
• up to 3 output modules BG 5912
• 1 diagnostic module BG 5551 for CANopen, or
• 1 diagnostic module BG 5552 for Profibus-DP
The BH 5911 controls the whole system.
The input/output modules can be used to expand the control unit in a
modular way into a multi-functional safety system.
To transmit status messages of the individual modules to a moni to ring or
control unit, one of the following diagnostic modules may be connected:
• BG 5551 for CANopen
• BH 5552 for Profibus-DP
Indication
Green LEDs:
on, when all inputs are present and start
button activated.
White LEDs Run1/
Run 2 and outputs
48 and 58:
indicate the current status of the module.
1
Canada / USA
07.10.15 en / 477