Cypress CY3203-CapSense Quick Start Manual - Page 10

Browse online or download pdf Quick Start Manual for Motherboard Cypress CY3203-CapSense. Cypress CY3203-CapSense 20 pages. Psoc express

Print Page
Create a CapSense Project
3.10. In the properties pane at the bottom of the window, set the Diplexing field to Enable.
3.11. Click OK. The CSA Slider Properties window will open.
3.1.
Click OK to accept the default settings. Another Add Input Driver window will open automatically.
3.2.
Name this driver CapSenseProperties.
3.3.
In the Properties pane, set ExternalCap to Enabled.
3.4.
Click OK.

Add an LCD Value Driver to Your Design

3.5.
In the Driver Catalog pane, go to Outputs
design. The Add Output Driver window will open.
3.6.
In the Add Output Driver window, name the driver LCD and click OK to accept the default settings.

Define the LCD Transfer Function

3.7.
You now have three drivers on your design desktop: Slider, LCD, and CapSenseProperties. Right-click
the LCD driver and select Transfer Function.
Note: If your driver icons are stacked on top of each other, simply use your mouse to click and drag each driver
to a new location until all three drivers are clearly visible. You may also click your mouse button while holding the
[Ctrl] or [Ctrl] + [Shift] keys to zoom in and out respectively.
3.8.
In the Select Transfer Function window, select PriorityEncoder and click OK.
10
Display
LCD, and add an LCD Value driver to your
CY3203A-CapSense Quick Start Guide, Spec. # 001-17826 Rev. *A