Acquisitions XF-WSL LPG Installation & User's Instructions - Page 13

Browse online or download pdf Installation & User's Instructions for Indoor Fireplace Acquisitions XF-WSL LPG. Acquisitions XF-WSL LPG 16 pages.

Print Page

USER INSTRUCTIONS

Section

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

1.0

IMPORTANT NOTES

The installation and Servicing of this fire MUST only be carried out by a competent person (such as a

CORGI registered fitter) in accordance with the Gas Safety (Installation and Use) Regulations 1998,

the relevant British Standards, Codes of Practice, the Building Regulations and the manufacturer's

instructions.

Failure to comply with the above recommendations could lead to prosecution and invalidate the appli-

ance warranty.

Always keep a note of the installer's name and address, CORGI registration number, the original pur-

chase receipt and the date of installation for future reference. Failure to produce these documents

may invalidate the warranty.

The appliance should be serviced regularly to ensure continued safe operation. See the servicing

section for further reference.

Parts of this appliance become naturally hot during use. It is recommended that a suitable fireguard

conforming to BS 8423 is used, especially where young children, pets, the elderly or infirm are con-

cerned.

The manufacturer of this appliance considers all surfaces as working surfaces with the exception of

the control knob.

Combustible items, such as flooring and furniture and soft wall coverings (such as blown vinyl or

embossed paper), low temperature surrounds etc may discolour if fitted too close to the fire. See

relevant section for further details on clearances to combustibles. No combustible materials or floor-

ing should protrude onto the hearth (if fitted).

This appliance incorporates a combustion monitoring system (ODS).

DO NOT burn any foreign material on this fire. Under no circumstances shall the appliance be used if

the glass front door or panel has been removed or damaged.

It should be noted that heaters create warm air currents. These currents move heat to wall surfaces

next to the heater. Installing the heater next to vinyl or cloth wall coverings or operating the heater

where impurities in the air (such as tobacco smoke, candle smoke etc.) exist, may cause the walls to

become discoloured.

This appliance is intended as a secondary source of heat only and should not be used in a room with-

out some form of background heating present. If the appliance is used in a room as the sole source of

heat, then condensation may occur on colder surfaces within the room.

Do not place any objects on top of the appliance.

The integral catalyst should be checked by the installer upon servicing to ensure there are no defects

or obstructions that may prevent the satisfactory flow of combustion products.

The expected life of the catalyst is in excess of 11,000 hours (10 years of normal use). After this

time the catalyst should be replaced.

This appliance is only suitable for the gas type for which it is supplied.

WARNING: Due to the nature of this product the area around the top of the appliance (i.e. the grille)

gets very hot. Care should be taken when operating the appliance.

Content

Important Notes

Clearances to Combustibles

Ventilation & Room Size

Operating Instructions

Combustion Monitoring System

Cleaning

Servicing

List of Replacement Parts

Page No