Cloud CS-C3 Installation Manual - Page 3

Browse online or download pdf Installation Manual for Speakers Cloud CS-C3. Cloud CS-C3 4 pages.
Also for Cloud CS-C3: Installation Manual (4 pages)

Print Page

INSTALLATION

Step 1

Remove speaker from box.

Step 2

Mark and cut hole in ceiling or ceiling tile.

Use included hole template.

Step 3

Locate euroblock in accessory bag and connect signal wire.

For daisy-chaining use "LINK" output to run to next speaker.

CS-C3: 140 mm (5.50")

CS-C4: 177 mm (6.88")

All other models:

271 mm (10.67")

Step 4

Remove grille and set tap switch to proper setting and attach

grille leash to baffle by placing the large end of the clip over

the snap fit post (1) then sliding the clip until small end snaps

into place. Tap switch is preset to highest 100 V position.

Step 5 (Ceiling Tile Only)

Place tile bridge on back of ceiling tile. Align holes and insert

speaker in hole. Tighten dog ears. Do not overtighten.

(Tile bridge not available for C4.)

Step 6

Insert euroblock into rear of back can. Attach safety restraint

to rear of back can. Close and secure cover plate.

CS-C Series Installation Guide v2.4