Cloud CDI-S100 Installation Manual - Page 10

Browse online or download pdf Installation Manual for Recording Equipment Cloud CDI-S100. Cloud CDI-S100 12 pages. Interface card
Also for Cloud CDI-S100: Installation & Setup Manual (11 pages)

Print Page

Set master mic level

The strings used to set the master level of the CX462's microphone channel are the same as those

to set the music channel level, except that the character 'U' is replaced by 'I'. As with the music

channel, adjustment is in half-dB steps, and the values m, p and q in the General Format table above

represent the number of half-dB steps (and are thus double the number of dBs required by the

absolute or relative level change).

EXAMPLE

Set mic level to 20 dB below

maximum

Reduce Mic level by 10 dB

Increase mic level by 3 dB

6. Mute/unmute all microphones

In addition to muting/unmuting the mic inputs individually, the CX462's microphone channel can be

muted at the master stage. The command strings to mute or unmute the mic channel contain no

variables, thus the commands given in the General Format table are always applicable.

EXAMPLE

Mute mic channel

Unmute mic channel

CDI-S100 Installation Guide v1.0

COMMAND (ASCII)

<MI,LA40/>

<MI,LD20/>

<MI,LU6/>

COMMAND (ASCII)

<MI,M/>

<MI,O/>

COMMAND (HEX)

3C 4D 49 2C 4C 41 34 30 2F 3E

3C 4D 49 2C 4C 44 32 30 2F 3E

3C 4D 49 2C 4C 55 36 2F 3E

COMMAND (HEX)

3C 4D 49 2C 4D 2F 3E

3C 4D 49 2C 4F 2F 3E