Cypress CLUX-14CEC Operation Manual - Page 6
Browse online or download pdf Operation Manual for Media Converter Cypress CLUX-14CEC. Cypress CLUX-14CEC 12 pages. 1x4 hdmi 1.3 splitter
Also for Cypress CLUX-14CEC: Operation Manual (5 pages), Operation Manual (6 pages)
Print Page
5. Features
HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver
Deep color video up to 12bit, 1080p@(24/60)Hz
Simultaneously displays one HDMI source on four displays
HDCP keysets that allow each output to work independently when
connected to an HDMI display
Splits a single HDMI source into four outputs(max.) without signal loss
Supports DVI source and display via an HDMI to/from DVI adaptor
cable.
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission (32-192kHz Fs sample rate)
Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p
HDMI cable distance testing showed that with 1080p/8bits resolution the
Input/Output source can reach up to 20/15 meters away, and at
1080p/12bits the I/O source can reach up to 10/10 meters.
Note:
A. Cable tested with CAT-6E /23AWG/Solid, using cables of another type
may result in a different operating distance.
B. Cable distance test included the following: PS3 120G and 37" Samsung
12-bit LCD TV.
C. Figures provided in this manual are for reference only, actual
figures may depend on the source and display used along with the
type of cable.
Supports EDID functionality and settings for Deep Color and color space.
When EDID is switched to TV mode, the system will automatically detect
Deep Color (8 bits or 12 bits) and color space (RGB or Y/Cb/Cr) settings
from the source's EDID and record it into the unit. (For more detail please
refer to section 7.1)
Supports xvYCC and CEC bypass and also system reset functions
Has CEC functions such as one touch play & record, a programmable timer,
menu language, deck & device menu control, OSD display, device OSD
transfer, remote control pass through, system audio control and system
standby.
System standby will only be actived once the last TV is switched to standby
2