Cypress HTCP-255DN Operation Manual - Page 9
Browse online or download pdf Operation Manual for Media Converter Cypress HTCP-255DN. Cypress HTCP-255DN 16 pages. Pc/hd to 1080p dvi scaler box
Print Page
The device accepts component, PC and DVI inputs. The formats
supported by these inputs are as follows:
• When connecting to a PC source use a 15-pin D-sub cable to
connect the output of a PC to the D-Sub input connector of the
device.
• When connecting to a component source (either SD or HD
resolution) use a 3RCA to 3RCA cable to connect the YPbPr or
YCbCr output of a DVD or Set Top Box to the Y-Cb/Pb-Cr/Pr input
connecter of the device.
• When connecting to a DVI source, use a DVI-I or DVI-D cable to
connect the DVI output of a PC or DVD to the DVI input connector
of the device.
• When connecting to a HDMI source, use a HDMI cable to connect
to the HDMI output of a HDMI source, such as DVD or STB, on the
one end. And use a HDMI to DVI connector adaptor to connect
to the other end of the HDMI cable. The DVI connector of the
adaptor is then connect to the DVI input of the device.
The device can automatically detect the input resolution of all three
inputs. To switch from one input source to another just press the input
button on the front panel ("+") or on the remote control.
6 6