Cypress CY62146DV30 Specification Sheet

Browse online or download pdf Specification Sheet for Computer Hardware Cypress CY62146DV30. Cypress CY62146DV30 12 pages. 4-mbit (256k x 16) static ram

Print Page
Features
• Very high speed: 45 ns
• Wide voltage range: 2.20V–3.60V
• Pin-compatible with CY62146CV30
• Ultra-low active power
— Typical active current: 1.5 mA @ f = 1 MHz
— Typical active current: 8 mA @ f = f
• Ultra low standby power
• Easy memory expansion with CE, and OE features
• Automatic power-down when deselected
• CMOS for optimum speed/power
• Packages offered 48-ball BGA and 44-pin TSOPII
• Also available in Lead-free packages
Functional Description
The CY62146DV30 is a high-performance CMOS static RAM
organized as 256K words by 16 bits. This device features ad-
vanced circuit design to provide ultra-low active current. This
is ideal for providing More Battery Life™ (MoBL
applications such as cellular telephones. The device also has
Logic Block Diagram
A
10
A
9
A
8
A
7
A
6
A
5
A
4
A
3
A
2
A
1
A
0
Note:
1. For best practice recommendations, please refer to the Cypress application note "System Design Guidelines" on http://www.cypress.com.
Cypress Semiconductor Corporation
Document #: 38-05339 Rev. *A
max
[1]
) in portable
DATA IN DRIVERS
256K x 16
RAM Array
COLUMN DECODER
•
3901 North First Street
4-Mbit (256K x 16) Static RAM
an automatic power-down feature that significantly reduces
power consumption. The device can also be put into standby
mode reducing power consumption by more than 99% when
deselected (CE HIGH). The input/output pins (I/O
I/O
) are placed in a high-impedance state when: deselected
15
(CE HIGH), outputs are disabled (OE HIGH), both Byte High
Enable and Byte Low Enable are disabled (BHE, BLE HIGH),
or during a write operation (CE LOW and WE LOW).
Writing to the device is accomplished by taking Chip Enable
(CE) and Write Enable (WE) inputs LOW. If Byte Low Enable
(BLE) is LOW, then data from I/O pins (I/O
written into the location specified on the address pins (A
through A
). If Byte High Enable (BHE) is LOW, then data
17
from I/O pins (I/O
through I/O
8
specified on the address pins (A
Reading from the device is accomplished by taking Chip
Enable (CE) and Output Enable (OE) LOW while forcing the
Write Enable (WE) HIGH. If Byte Low Enable (BLE) is LOW,
then data from the memory location specified by the address
pins will appear on I/O
to I/O
0
LOW, then data from memory will appear on I/O
the truth table at the back of this data sheet for a complete
description of read and write modes.
The CY62146DV30 is available in a 48-ball VFBGA, 44-pin
TSOPII packages.
I/O
–I/O
0
I/O
–I/O
8
,
•
San Jose
CA 95134
CY62146DV30
through
0
through I/O
), is
0
7
) is written into the location
15
through A
).
0
17
. If Byte High Enable (BHE) is
7
to I/O
. See
8
15
7
15
BHE
WE
CE
OE
BLE
•
408-943-2600
Revised February 2, 2005
0
[+] Feedback