Ashly ne4800 Operating Manual - Page 2
Browse online or download pdf Operating Manual for Computer Hardware Ashly ne4800. Ashly ne4800 20 pages. Network enabled dsp processor
Also for Ashly ne4800: Operating Manual (20 pages), Specifications (3 pages), Manual (20 pages)
Print Page
Operating Manual - ne8800, ne4800, ne4400 DSP Processor
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point
within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance instructions in the literature accompanying the device
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
6. Do not use this apparatus near water.
7. Clean only with dry cloth.
8. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
9. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
10. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
12. Only use attachments/accessories specified by the
manufacturer.
13. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
14. Unplug this apparatus during lightning storms or when
unused for long periods of time.
15. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in both a commercial and residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
2
Important Safety Instructions
Consignes de sécurité à lire attentivement
FCC Compliance
Le symbole de la flèche dans un triangle équilateral symbolisant la foudre est prévu pour sen-
sibiliser l'utilisateur à la présence de tension de voltage non isolée à l'intérieur de l'appareil.
Elle pourrait constituer un danger de risque de décharge électrique pour les utilisateurs. Le
point d'exclamation dans le triangle équilatérale alerte l'utilisateur de la présence de consignes
qu'il doit d'abord consulter avant d'utiliser l'appareil.
1. Lisez ces instructions.
2. Conservez ces instructions.
3. Observez les avertissements.
4. Suivez ces instructions.
5. Pour réduire le risque de feu ou la décharge électrique,
ne pas exposer cet appareil pour pleuvoir ou l'humidité.
6. Ne pas utiliser l'appareil près de l'eau.
7. Le nettoyer à l'aide d'un tissus sec.
8. Ne pas bloquer les ouvertures de ventilation, installer
selon les consignes du fabricant.
9. Eloigner des sources de chaleur tel: radiateurs,
fourneaux ou autres appareils qui produisent de la
chaleur.
10. Ne pas modifier ou amputer le système de la mise à
terre. Une prise avec mise à terre comprend deux lames
dont une plus large ainsi qu'une mise à terre: ne pas la
couper ou la modifier. Si la prise murale n'accepte pas
la fiche, consulter un électricien pour qu'il remplace la
prise désuète.
11. Protéger le cordon de secteur contre tous bris ou
pincement qui pourraient l'endommager, soit à la fiche
murale ou à l'appareil.
12. N'employer que les accessoires recommandés par le
fabricant.
13. N'utiliser qu'avec les systèmes de fixation,chariots,
trépied ou autres, approuvés par le fabricant ou vendus
avec l'appareil.
14. Débrancher l'appareil lors des orages électriques ou si
inutilisé pendant une longue période de temps.
15. Un entretient effectué par un centre de service accrédité
est exigé si l'appareil a été endommagé de quelque
façon: si il a été exposé à la pluie,, l'humidité ou s'il ne
fonctionne pas normalement ou qu'il a été échappé.