Ashly Protea NE8250.10 Operating Manual - Page 9

Browse online or download pdf Operating Manual for Computer Hardware Ashly Protea NE8250.10. Ashly Protea NE8250.10 16 pages. Network enabled multi-channel power amplifiers
Also for Ashly Protea NE8250.10: Operating Manual (16 pages), Operating Manual (16 pages), Specifications (2 pages), Specification Sheet (2 pages), Operating Manual (16 pages), Operating Manual (20 pages)

Print Page

Operating Manual - NE Multi Channel Power Amplifier

WR-1 Remote Level Control - The WR-1 is a dual potentiometer remote volume control designed to fit in a standard

wall electrical box, and is wired to the amplifier (with or without DSP installed) back panel Euroblock connector labeled "Remote

Level Control" using four conductor wire. If wiring a custom potentiometer assembly other than the WR-1, connect +5V from

the Remote Level Control Euroblock connector to the potentiometer's CW pin, GND to the CCW pin, and the channel under

control to the wiper. Do not connect the WR-1 remote level control ground to any other external grounds.

WR-2 Remote Preset Recall Switches - The WR-2 al-

lows selection of one of four presets via interlocking pushbutton

switches. Each pushbutton switch can be connected to a Preset

Recall Pin on the back panel of the amplifier. The terminal

numbers correspond to the first 4 Preset Memory locations in

the controlled amplifier. Pressing a button will select the cor-

responding preset. Windows are provided by each switch for a

user-generated label.