Dolphin DP1102E User Manual - Page 3

Browse online or download pdf User Manual for Dispenser Dolphin DP1102E. Dolphin DP1102E 12 pages. Liquid soap and disinfectant sensor dispenser

SA FE T Y I N FOR MATI ON
Operating fluids and cleaning agents can cause skin and eye irritation or damage.
Always wear protective gloves.
Keep operating fluids and cleaning agents out of eyes.
Observe the safety information on the packaging of the operating fluids and cleaning agents.
Troubleshooting
The dispenser only works when installed and, if applicable, when the housing is closed
(surface-mounted dispensers).
Fault/LED signal
LED flashes red slowly
LED flashes red quickly and
dispenser inoperative
LED lights up red and
dispenser inoperative
LED lights up orange and
dispenser inoperative
LED is not illuminated and
dispenser inoperative
Cause
Batteries almost empty
Pump jammed
Batteries empty
Incorrect battery polarity
Magnet in the housing or in
the pump bracket is missing
or pump bracket is bent
Batteries missing
Plug-in power supply not
plugged in correctly
No power or plug-in power
supply defective
Module not positioned
correctly in rear panel
Solution
Change batteries
Clean pump, replace if
necessary
Change batteries
Insert batteries correctly
Replace magnet or align
pump bracket
Insert batteries
Insert the plug as far as it
will go
Alternatively, insert batteries
If the dispenser is working:
Check power connection
Replace power supply if
necessary
Insert the Module properly
(see page 24)
3