Dolphin DOLGDO318LIPW4 Instructions - Page 3

Browse online or download pdf Instructions for Keypad Dolphin DOLGDO318LIPW4. Dolphin DOLGDO318LIPW4 4 pages. Wireless garage door keypad 433 mhz dip switch

Print Page

Position the keypad on the garage door frame with the provided screws.

Lift up the cover and insert the long screw above the keypad in the slot

provided (a).

Remove the battery cover and insert the second long screw in the

lower slot (b).

Replace the battery cover.

5. RETURN TO DEFAULT SETTINGS

Return to Default Settings

1. Desconnect the power by removing the battery.

2. Press the

3. Re-connect the battery to power up the keypad.

4. Release the

Note: The keypad is returned to the defaul "Master Code"

Entry Codes are deleted.

Multi-color status LED

ORANGE - Key depress

GREEN - Code was entered correctly and the keypad is transmitting

GREEN - Programming Mode

RED - (Flashing 3 times) Error was made in either programming mode or in

code entry.

If this transmitter triggers other doors in your neighborhood, change all your transmitters

and receivers to a new code setting.

DO NOT let children use the keypad without adult supervision. Children can injure

themselves, or others, if left unsupervised. Make sure all the required safety devices are

installed before operating any door.

The keypad is approved by the FCC and it complies with Part 15 of the FCC Rules. Its

operation is subject to the following 2 conditions:

1. This device may not cause harmful interference.

2. The device must accept any interference that may cause undesired operation.

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

FCC ID: SU7DOLGDO318LIPW4

, and

keys simultaneously.

, and

keys.

cover

. And all User