Dolphin KEYTS310 Manual

Browse online or download pdf Manual for Keypad Dolphin KEYTS310. Dolphin KEYTS310 2 pages. Dolphin keyts300; keyts310 wireless garage door keypad dual frequency 300/310 mhz

Print Page

If this transmitter triggers other doors in your neighborhood, change all your transmitters

and receivers to a new code setting.

DO NOT let children use the keypad without adult supervision. Children can injure

themselves, or others, if left unsupervised. Make sure all the required safety devices are

installed before operating any door.

The keypad is approved by the FCC and it complies with Part 15 of the FCC Rules. Its

operation is subject to the following 2 conditions:

1. This device may not cause harmful interference.

2. The device must accept any interference that may cause undesired operation.

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

FCC ID: SU7KEYDOL300310

If, within two years from date of purchase, this product should become defective

(except battery), due to faulty workmanship or materials, it will be repaired or replaced,

without charge. Proof of purchase and a Return Authorization are required.

Dolphin Wireless Garage Door Keypad

Dual Frequency 300/310 MHz

Keypad Instructions

Thank you for your purchase of the Community Controls Dolphin

wireless keypad. The KEYTS300/310 will accomodate one 4 digit PIN

to activate a signal transmission.

Package contains:

Keypad

9 volt battery

2 screws + wall anchors

Keypad instructions

Please follow the detailed instructions below in order to set up the Dolphin keypad to

operate with your garage door opener or receiver.

OPERATIONAL FEATURES

Pressing any key illuminates the keypad for 5 seconds.

A "buzzer" indicates each button depression.

After 20 incorrect key entries, the keypad will "lock up" for 40 seconds.

If the battery is low the LED flashes rapidly for 5 seconds, indicating it is time to

replace the battery.

After you have entered a valid code, the LED will flash during the 5 second "time

out" period. During the "time out" period you may press any key and the keypad

will send another signal to your receiver each time you press a key.

The

key resets your entry. If you make a mistake while entering your PIN,

pressing the

key resets your entry so you can start over.

HINT: If you always begin your PIN with the

faulty operation

Product # KEYTS300/310

you will reduce the likelihood of