ASHVAC A050 Series Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Vacuum Cleaner ASHVAC A050 Series. ASHVAC A050 Series 8 pages. Mu305, mu405, a050 series

Print Page

CREVICE TOOL:

Use the crevice tool to clean tight corners.

MAINTENANCE

THOROUGH FILTER CLEANING

1. Unplug the unit from the electrical outlet.

2. Before removing the outer filter, use a

household vacuum to vacuum along the

hose clamp so the dust that collects there

will not fall inside the filter when it is

removed.

3. Remove the outer filter and vacuum the

outside of the inner filter and the inside

of the outer filter.

4. Before reattaching the filters, inspect

them for possible holes which may allow

ash to penetrate to the motor. Silicone

rubber sealant may be used to repair

small holes.

5. Reattach the filters to the lid making sure

the filters and hose clamps are placed

properly and tightly. (Refer to Filter

Installation)

FAQ

QUESTION

How do I avoid

Be sure the nozzle is not in

clogging the

backward. Put the large end

nozzle?

in the hose and the crimped

end out.

Place nozzle flat on firebrick

and rub to move the large

particles out of the way,

maintain air flow. Tap nozzle

on firebrick to crush larger

particles as they accumulate

on the end of the nozzle.

Why is dust

Check filter for holes and

escaping?

replace if necessary.

Check that all 3 tabs on spark

arrester are locked in place.

Why is the hose

Cleaning ash that is TOO

hot?

WARM. NEVER use gloves to

compensate for a HOT hose.

Why is there

Clean Filters. Turn off vacuum

poor suction?

and lift the agitator rod

slightly and shake from side to

side 5 times.

ANSWER