ASI 0391-1A Installation And Maintenance Manual - Page 10
Browse online or download pdf Installation And Maintenance Manual for Dispenser ASI 0391-1A. ASI 0391-1A 16 pages. Soap dispenser and remote control
Print Page
FILLING THE SOAP BOTTLE AND PRIMING THE SOAP DISPENSER
Remove the soap bottle from the
EZFILL™ soap dispenser bracket
and pour liquid soap into container
1
until it is full. Refer to 'Technical
Data' section of this manual for
soap specifications. (Page 5)
Should any soap spill over
the outside of the bottle,
clean it thoroughly. Replace
2
clean soap bottle into original
position in the EZFILL™ soap
dispenser bracket.
STEP 2 - PRIMING THE SOAP DISPENSER
Press and hold the fill button
located on the EZFILL™ soap
dispenser pump
1
until soap starts dispensing
from the spout.
Optionally press (once) the
fill function on the soap
dispenser
2
while pointing LED at sensor.
See SETTINGS ADJUSTMENT
in 0390-R operation manual.
9
1408201627 Rev G
STEP 1 - FILLING THE SOAP BOTTLE
assembly
remote
control
press
FILL
press
05 August 2015