Cypress Semiconductor S6SAP412A Operation Manual - Page 4

Browse online or download pdf Operation Manual for Motherboard Cypress Semiconductor S6SAP412A. Cypress Semiconductor S6SAP412A 18 pages. 2ch buck + 1ch buck/boost dc/dc
Also for Cypress Semiconductor S6SAP412A: Operation Manual (19 pages)

Print Page

Cautions

Caution of the Products Described in this Document

The following precautions apply to the product described in this manual.

WARNING

Electric shock,

Damage

Electric shock,

Damage

CAUTION

Cuts, Damage

Cuts

Damage

S6SAP412A 2ch Buck + 1ch Buck/Boost DC/DC Evaluation Board Operation Guide, Doc. No. 002-08676 Rev. *A

Arrow.com.

Downloaded from

Indicates a potentially hazardous situation which could result in death or serious injury and/or a fault in the

user's system if the product is not used correctly.

Before performing any operation described in this manual, turn off all the power supplies to the system.

Performing such an operation with the power on may cause an electric shock or device fault.

Once the product has been turned on, do not touch any metal part of it.

Doing so may cause an electric shock or device fault.

Indicates the presence of a hazard that may cause a minor or moderate injury, damages to this product or

devices connected to it, or may cause to loose software resources and other properties such as data, if the

device is not used appropriately.

Before moving the product, be sure to turn off all the power supplies and unplug the cables. Watch your step

when carrying the product. Do not use the product in an unstable location such as a place exposed to strong

vibration or a sloping surface. Doing so may cause the product to fall, resulting in an injury or fault.

The product contains sharp edges that are left unavoidably exposed, such as jumper plugs.

Handle the product with due care not to get injured with such pointed parts.

Do not place anything on the product or expose the product to physical shocks. Do not carry the product after

the power has been turned on.

Doing so may cause a malfunction due to overloading or shock.

Since the product contains many electronic components, keep it away from direct sunlight, high temperature,

and high humidity to prevent condensation. Do not use or store the product where it is exposed to much dust

or a strong magnetic or electric field for an extended period of time. Inappropriate operating or storage

environments may cause a fault.

Use the product within the ranges given in the specifications.

Operation over the specified ranges may cause a fault.

To prevent electrostatic breakdown, do not let your finger or other object come into contact with the metal

parts of any of the connectors. Before handling the product, touch a metal object (such as a door knob) to

discharge any static electricity from your body.

When turning the power on or off, follow the relevant procedure as described in this document. Before turning

the power on, in particular, be sure to finish making all the required connections. Furthermore, be sure to

configure and use the product by following the instructions given in this document. Using the product

incorrectly or inappropriately may cause a fault.

Because the product has no casing, it is recommended that it be stored in the original packaging. Transporting

the product may cause a damage or fault. Therefore, keep the packaging materials and use them when re-

shipping the product.