Cypress Semiconductor CapSense CY3280-BSM Universal Quick Start - Page 2
Browse online or download pdf Quick Start for Control Unit Cypress Semiconductor CapSense CY3280-BSM Universal. Cypress Semiconductor CapSense CY3280-BSM Universal 4 pages. Simple button module kit
Print Page
1. Kit Contents
Each CY3280-BSM Universal CapSense™ Simple Button Module Kit contains:
■
CY3280-BSM Universal CapSense Module Board
■
CY3280-BSM Universal CapSense Module Board CD/DVD
■
CY3280-BSM Quick Start
■
3 mm Acrylic Overlay with adhesive
■
1.5 mm Acrylic Overlay with adhesive
Universal CapSense Module boards are available for purchase separately, or as part
of combination kits. Do visit
Prerequisites:
■
Universal CapSense Controller Board
■
PSoC MiniProg
■
I2CUSB Bridge
■
USB Mini-B Cable
2. Module Hardware
This module is comprised of components and sensors detailed in the following figure.
CapSense
Buttons and
LEDs
The module consist of ten CapSense buttons and ten LEDs. These are interfaced to
the CapSense controller board via 44 pin receptacle connector (J1). A three pin jumper
(J2) is provided for selection between shield electrode and ground. The board also
incorporates an optional I2C EEPROM and thermistor that are not populated by
default.
Page 2
www.cypress.com/shop
Optional I2C EEPROM
Footprint (On Reverse Side)
Shield
Selection
Jumper (J2)
for more information.
Voltage Test Points
44 Pin CapSense
Connector (J1)
Optional Thermistor
Footprint
(On Reverse Side)
[+] Feedback