Asiatelco AWP-S Series User Manual - Page 8

Browse online or download pdf User Manual for Telephone Asiatelco AWP-S Series. Asiatelco AWP-S Series 15 pages. Cdma fixed wireless phone

Print Page

3.2.3 Display Icon

The following icon may appear on the display of the phone:
No.
Icon
Description
1
Current signal strength. The more bars there are, the stronger the signal is.
2
No signal.
3
Battery capacity indicator. The more bars there are, the more capacity the battery has.
4
Supplied by charger
5
Alarm on
6
Mute
7
Keypad lock
8
No UIM card
9
Unread message
10
Roaming
11
Speakerphone actives

4 Basic Operations

4.1 Power On/Off

Hook up handset to your phone and put the handset to hang up position, then connect DC power supply to the
"DC IN" port at the rear of the phone or insert the battery to the battery chamber. Switch the "Power" switch (on
the rear of the Phone) to ON, then press the Power On/Off Key on the panel for 3 seconds to power on the
phone, your phone should go to idle screen and is ready to use.
You can turn the phone off directly by switching the "Power ON/OFF" switch (on the rear of the phone) to OFF
position. If the phone will not be used for long time, please turn this switch to OFF. Or you can press the Power
On/Off Key for 3 seconds to power off the phone.

4.2 Make a Call

While your phone is power on and at idle screen, enter a destination number you wish to call and then press
SEND Key. (Note: To modify digits you enter, you can press BACK/CLR Key to delete wrong digits first and
then enter new digits). Once the call is connected, the phone's screen will display the number you have dialed,
and the time duration the call has lasted.
The phone also has a speaker. To use the speaker to make a call, press SPEAKER Key, enter a phone number,
and press SEND Key.

4.3 Answer a Call

When there is an incoming call, the phone will ring and display the phone number of the incoming call (if the
number is available). You can pick up the handset or press SPEAKER Key to answer the incoming call. The
ring tone and ring-tone volume can be changed in the setting menu.

4.4 End a Call

You can end a call by pressing END Key. If you are using the handset for a phone call, hanging up the handset
will end the call automatically.
AsiaTelco Technologies Co.
AWP-S Series
CDMA Fixed Wireless Phone
User Manual
Figure 3 Display Icon
Proprietary/Confidential
Rev.:
R1.0
5