CyronMotor ABIG5-A6K User Manual - Page 2

Browse online or download pdf User Manual for Motorcycle Accessories CyronMotor ABIG5-A6K. CyronMotor ABIG5-A6K 4 pages. Led headlight

Print Page

DAYTIME RUNNING LIGHTS (DRL) - 7" LIGHTS that are provided with DRL have

separate wires from the main 3-pin H4 plug. This is an optional hook up and does not affect

the headlight operation.

___ URBAN7: Offers two colors of DRL. White DRL is RED wire, Amber DRL is Green

Wire. Only connect one. HINT: You may put a switch to toggle between the two as you

choose.

___ BEAST-II: Yellow wire DRL (DO NOT connect the short back lead)

Connect DRL wire to vehicle/motorcycle DRL wire. Harley motorcycles DRL wire is an

orange/white wire. If you are using ABIGC2A Harley adapter and your bike has the

orange/white wire, connect DRL to BLUE (GREEN for certain models) wire of the adapter.

If vehicle/car is not equipped with DRL, it can be connected to marker lights. On older bikes

that do not have DRL wire, it can be spliced into the low beam wire (white). This can be

easily done with a wire tapping crimp connector (not provided). As a final alternative DRL

can be connected via an accessory switch to +12VDC and make it operate manually or as

an accent light.

"URBAN" ABIG7-A6K has a 2nd lead (green wire) for amber DRL lights. This can be used

as standard DRL or as directional lights in cars.

ALIGNMENT

For proper operation it is vital to check the aim of the headlight. See guideline. During

testing make sure:

a. The vehicle is on

level surface

b. There are no

excessive loads in the

vehicle affecting its

leveling

c. For motorcycles it is

a good idea to align

with the rider on the

bike

d. After alignment do

a road test to assure

proper visibility has

been achieved.

Further adjustment

may be necessary to

get the optimum

performance.

Ensuring undisturbed visibility of other drivers is vital to your safety.

Drive & Ride Safe!