Cyrus CS22 XCITED User Manual - Page 5

Browse online or download pdf User Manual for Cell Phone Cyrus CS22 XCITED. Cyrus CS22 XCITED 20 pages.

Print Page

2. Introduction

2.1 Insertion and removal of the SIM Card(s) and/or

SD Card(s)

Switch the mobile phone off, slide the pen into the side hole, and push

the pen until the SIM card slot protrudes slightly and you can remove

the slot. Place the SIM card(s) or a SIM card and an SD card in the

slot. Please place the cards as indicated by the slide-in frame and the

contacts point towards the back of the unit.

T I P :

SIM cards do not support changing while the device is

running (hot plug). Do not change the SIM card in stand-by

mode, as this could damage the card

2.2 Insertion and removal of the battery

The battery is built in.

N O T E :

The phone battery cannot be removed manually.

2.3 Charging the battery

Charge the battery completely as following:

1. Connect the Micro USB cable to the Micro USB port on the phone.

2. Insert the plug into the socket. The battery icon is now displayed

dynamically, indicating for the user that the device is charging.

3. When charging is completed, the symbol of a full battery is displayed.

T I P :

You can also charge your mobile phone via a USB data

connection and on the computer. If the battery of your

phone has been completely consumed, it may be impossible

to charge via a USB cable. Then you should definitely use

the charger to recharge the phone battery

3. Basic functions

3.1 Switch the device on/off

Press and hold the power key to turn the mobile phone on and off.

T I P :

It takes a moment to initialize the phone. Please wait patiently.

If the mobile phone is is turned on before the SIM card is

inserted, only some functions of the mobile phone can be

used normally. After the SIM card is inserted, the phone

automatically determines whether it can be used or not.

3.2 Locking and unlocking the screen

If the mobile phone hasn't been in use for a period of time, the screen

becomes black to enter the screen-lock state and save battery power.

Lock screen/mobile phone:

press the power button.

Unlock screen/mobile phone: Press the power button, the screen

lights up, and the screen-locked state

is displayed. Tap the unlock icon and

drag it up to unlock the screen. If you

have set the lock pattern or password

protection, the mobile phone will ask

you to draw the pattern or enter a

password.

MAIN MENU » SETTINGS » SECURITY » SCREEN LOCK »

SET SCREEN LOCK » PATTERN LOCK

1. SET UP THE SCREEN LOCK » PATTERN.

2. Look for the screen tip and the sample pattern and tap twice NEXT.

3. Use your finger to draw a connecting line between 4 points to draw

the pattern.

4. Tap NEXT.