Cyrus CD i User Instructions - Page 6

Browse online or download pdf User Instructions for Stereo System Cyrus CD i. Cyrus CD i 15 pages. Hi-fi
Also for Cyrus CD i: User Instructions (18 pages)

Print Page
Cyrus CD i
a

Switching On

The mains power to the CD i should normally be left on unless left
unattended for a long period when the mains power at the wall socket
should be switched off or the product disconnected from the AC supply.
When power is applied, the STANDBY key b is used for power control.
The Standby light c shows red when the CD i is in Standby and green
when operational.

loading a disc

Before loading a disc, check that the display reads 'No Disc', indicating
that a disc is not already loaded. To load a disc, hold the disc label side
upwards and place it gently into the CD Loading Slot. Once a third of the
disc is loaded, the disc will be automatically loaded through the front
panel. The display will show 'Reading' while checking the contents of
the disc.

Playing a disc

Press the PLAY/PAUSE key 1@ on the front panel. Playback will commence
from track 1 unless otherwise selected.

Pausing

Press the PLAY/PAUSE key 1@ to pause the current track. The disc will be
held at the precise point of interruption and the PAUSE symbol will show
on the display. Press the PLAY/PAUSE key 1@ again to resume playing the
disc.
b c
d
1@
1!
1)

Key to the front panel drawing:

1.
CD Loading Slot
2.
Standby Key
3.
Standby Light
4.
Remote Eye
5.
Display Window
6.
Stop/Eject

OPERATION

e
17 17 17
59 : 57
59 : 57
59 : 57
i
h
7.

Repeat

8.
Search Forward
9.
Search Reverse
10.
Next Track
11.
Previous Track
12.
Play/Pause

fast forward/Reverse

The SEARCH FORWARD h and SEARCH REVERSE i keys may be used to
locate a specific point within a track. The search will commence initially
at a slow speed increasing after a few seconds if the key is held down.
The Search keys will also search through next or previous tracks if held
down long enough.

Previous/Next Track Selection

Pressing the NEXT 1) or PREVIOUS 1! keys allow you to change forward
or backward through the tracks on the CD. Track indications appear on
the display.
Repeat
The REPEAT key g can be used to replay the entire disc or programmed
tracks.
When REPEAT is selected, its symbol shows on the display. Press the key
a second time to clear Repeat.
If a program selection has been stored, the REPEAT key g will allow
continuous play of this program sequence.

Stop/Eject Key

When a disc is playing, press the STOP/EJECT Key f to stop the disc
immediately.
If the disc is already stationary, one touch of the STOP/EJECT key f will
eject the CD.
4
User Instructions
g
f