Cyrus DVD8 User Instructions - Page 10

Browse online or download pdf User Instructions for DVD Player Cyrus DVD8. Cyrus DVD8 13 pages.

Print Page
User Instructions

Playing an audio CD

Audio CDs contain music tracks only. You can play audio CDs using the OSD
or, through a stereo system only, using keys on the remote control and/or
front panel.
Playing an audio disc
Press
to play the disc. Play starts when you close the disc drawer.
As the disc plays, the player display shows the current track, and the elapsed
playing time.
On-Screen Display (OSD)
If the TV is connected and switched on during playback of an audio CD, the
CD OSD may be used to navigate the contents of the disc.
The OSD shows the following information about the disc-
•
Time display, showing total disc time
•
Track display, showing current track number
•
Track elapsed time display
•
Total track display
•
Total time display
•
Central track selection bar
Pause
Press
during play. To return to play, press
Moving to another track
You can move to another track by pressing
step through the track sequence.
To go directly to any track, enter the track number using the Numerical keys.
NOTE:- If the number has more than one digit, press the keys in rapid
succession.
Search
To search forwards or backwards through the disc at 4x normal speed, hold
or
for about 1 second during play. Search begins, and sound is
partially muted.
To step up to 8x normal speed, hold
search speed. Sound is now completely muted.
To return to 4x normal speed, press
To end the search, press
Repeat track/disc
To repeat the current playing track, press the
symbol will appear on the player display and the repeat track icon will be
displayed on the TV screen.
To repeat the entire disc, press
now be shown on the TV screen.
To exit Repeat mode, press
GB
GB
.
or
briefly during play to
or
again. The OSD will show the
or
again.
or
as desired.
key once. The Repeat
a second time. The Repeat Disc icon will
again. The Repeat symbols will switch off.
FTS programming for Audio CDs
Storing a program
1.
Load an audio CD and stop playback.
2.
Use the
key to go to the list of available tracks on the TV monitor
display.
3.
Use
or
or the Numeric Keypad to select the track you wish to
program from the list.
4.
Store each track by pressing OK.
5.
When track storing is complete, press
NOTE:- The FTS system has capacity for 20 program entries.
NOTE:- The stored program will be memorised and recalled when the DVD8
recognises this disc in the future.
Erasing a track from the FTS memory
1.
Use
to go to the 'program' list of selected tracks.
2.
Use
and
to select the track number to erase.
Press OK to erase the track.
3.
Clearing the complete FTS program
Use
to select 'Clear All', then press OK. The complete FTS program will be
erased.
Switching FTS on/off
FTS is switched on/off from the main FTS menu of the OSD.
Cyrus DVD8
to start playback.
8