Blueprint Subsea ArtemisPRO Quick Reference Manual - Page 4
Browse online or download pdf Quick Reference Manual for Sonar Blueprint Subsea ArtemisPRO. Blueprint Subsea ArtemisPRO 4 pages.
Print Page
USING NAVIGATION
Set Diver Position
To reset the divers
Where do you want to set your position to?
dead-reckoning
position choose a
Marker Position
Waypoint 2
Name:
MARKER or use a
54° 13' 54.273" N
Latitude:
-3° 2' 37.178" E
SATELLITE fix (from
the float, or return
MARKER
to the surface).
Reducing Errors
Calibrate the Compass before each dive to remove any magnetic errors
Hold ArtemisPRO level:
Poor Altitude Reading
Hold ArtemisPRO still:
Stable
(no Pitch or Roll)
Specify the Water Salinity in the Sensors menu of the Settings display
ˆ
DIVING & DIVE-LOGS
Starting A Dive
"HOME"
Start Dive
Where are you starting the dive from:
A MARKER position or a SATELLITE position?
MARKER
SATELLITE
MARKER
Start Dive
Which MARKER are you starting from?
2 / 8
Marker:
Waypoint 2
Name:
Latitude:
54° 13' 54.273" N
-3° 2' 37.178" E
Longitude:
PREVIOUS
SELECT
SELECT
Power:
Heading:
Depth:
Selected Marker:
217°
8.4m
Waypoint 2
"STOP DIVE"
P/N: BP01077.1A.5
Satellite Position
Internal
Receiver:
GOOD (0.3)
Quality:
SATELLITE
CANCEL
Level
(less than ±20°)
Good Altitude Reading
Not Level
(more than ±20°)
Avoid Large or
or Quick Movement
(Pitch and Roll)
Dead-Reckoning Dive
Ensure the internal Satellite receiver has a good fix
and a Mission File is selected if required.
Steps
"START DIVE"
starting location for dead-reckoning to track from.
At step
Has a
YES
NO
MISSION FILE
been selected
?
SATELLITE
CANCEL
YES
(Towing Float)
NEXT
DVL
CANCEL
START DIVE
Distance:
Altitude:
DiveLog:
374m
32.7m
Data is recorded in the Dive-Log
and Navigation starts.
Navigation Display
Position:
54° 13' 54.273" N
-3° 2' 37.178" E
Grid:
10m
Chart Scale
(Zoom in/out)
Set/Reset Position
Marker Manager
Power:
(Add, Select, Delete)
Compass Calibration
Choose "Calibrate Compass" from the Tools Screen - Press START to begin:
Hold ArtemisPRO in the six orientations
for each face of a cube.
For each orientation, rotate slowly on the
same spot in both directions.
Calibrating Z-axis
(up and down)
ƒ
„
and
allow the diver to choose the
...
choose NO to use dead-reckoning.
Start Dive
Are you towing the float on the surface?
(and need continuous SATELLITE positions)
(Use Dead Reckoning)
CANCEL
YES or NO
Start Dive
Check sensor readings are good, then choose
START DIVE to begin recording the Dive-Log.
Satellite Position
RUNNING
Internal
Status:
Receiver:
POOR (3.5)
Quality:
GOOD (37)
Quality:
CANCEL
START DIVE
Play/Pause
Copyright © 2017 - www.blueprintsubsea.com
Nav Mode:
DVL
WAYPOINT 1
WAYPOINT 8
TARGET 3
MARKER 3
MARKER 4
WAYPOINT 2
TARGET 2
WAYPOINT 6
MARKER 2
WAYPOINT 3
WAYPOINT 5
Heading:
Depth:
Selected Marker:
Distance:
Altitude:
DiveLog:
23°
3.1m
58m
4.9m
Waypoint 8
Ideal Result
Calibrating X-axis
(front and back)
Continuous Satellite Fix Dive
Connect the external GNSS float (using the internal
GNSS receiver for continuous satellite navigation is
not recommended as larger position errors can
occur as the receiver is submerged)
...
At step
choose YES to allow satellite fixes to be
processed during the dive (even if a float isn't
connected).
Replaying Dive-Logs
Select Dive-Logs to replay in the Dive-Log Manager display:
Move the list selection
up and down
Dive-Logs
1.
ArtemisPRO_20161018_114627
2.
ArtemisPRO_20161021_130852
3.
ArtemisPRO_20161103_092817
4.
ArtemisPRO_20161105_093712
5.
ArtemisPRO_20171108_144905
NO
Power:
Heading:
Depth:
Selected Marker:
23°
3.1m
Waypoint 8
Position:
54° 13' 54.273" N
WAYPOINT 1
-3° 2' 37.178" E
WAYPOINT 8
Grid:
Nav Mode:
10m
DVL
TARGET 3
MARKER 3
MARKER 4
WAYPOINT 2
TARGET 2
WAYPOINT 6
MARKER 2
WAYPOINT 3
WAYPOINT 5
Diver:
Depth: 5.7m
Altitude: 6.2m
Mission:
Sat Nov 11 13:29:18
Chart backgrounds are shown
if included in a NavPoint created
Mission File.
Select Navigation Marker
(from selected Mission File)
Clear Diver Track
Press PROCESS and ACCEPT
when complete.
Measured Field and
Spherical Coverage
Calibrating Y-axis
(le and right)
Current Dive-Log
Filename:
ArtemisPRO_20161105_093712
Mission File Used:
Diver Training Area
Created:
2016-11-05, 09:37:12
Markers:
Duration:
Size:
14
28m 15s
358Mb
Storage Used:
36%
Distance:
Altitude:
DiveLog:
58m
4.9m
Range:
Gain:
50m
20%
Frequency:
750kHz
Skip
±10%
UM-150-P01077-1A-05