Asko 1905 How To Use Manual - Page 7
Browse online or download pdf How To Use Manual for Dishwasher Asko 1905. Asko 1905 17 pages. Asko 1905: user guide
Print Page
•
Press the Start button
The machine will start and work through
the selected programme automatically.
• Want to change your
mind?
If you want to change programme
after you have started the machine,
press Stop for 3 seconds. Then
select a new programme by pressing
the appropriate symbol.
Dishwashing programmes
Options, see page 8
Programme features
=The dirty rinse water is emptied and the next period starts
with clean water (SCS= Super Cleaning System)
Main wash
Pre-wash
45
o
65
o
o
45
65
o
o
o
30
65
o
50
o
30
o
55
o
30
30
o
o
o
50
30
o
55
55
o
* For a dishwasher with water
softener the figures are about 3
litres higher.
• If you turn off the machine
at the main on/off switch
(or if there is a power failure) before
the programme has finished, the
programme will continue when
power is restored.
If the power is turned off during
drying, and the door is open for
more than two minutes, the
programme will be terminated.
Display
see page 10
Rinse agent and salt indication,
see page 12-13
Hot fill
ca 60°C
Cycle time,
Rinses
Drying
approx. min.**
70
o
90
o
65
80
65
o
70
o
65
80
o
55
70
55
o
80
55
o
65
o
55
30
o
55
35
4
8
** The programme times shown in the table are
= heat and fan
rounded-off values from actual tests by 1800 W.
= fan only
In prac-tice, times may vary some-what due to
the temperature of the water supply, voltage
Delayed start
see page 8
Start / Stop
see page 8
(not all models)
Consumption figures
Cold fill
ca 15°C
Energy
Cycle time,
Energy
approx. min.**
kWh ca**
kWh ca**
1,1
120
2,2
0,8
105
1,7
0,9
95
1,6
0,6
105
1,3
0,5
90
1,2
0,4
100
1,0
0,35
85
1,0
0,3
50
1,0
0,6
45
0,8
-
4
-
0,2
8
0,2
• After washing
When the machine has stopped, it
consumes only an extremely low power.
To turn it off completely, turn off the main
on/off switch.
The indicating lamp remains on as long
as the switch is in the On position. It is a
good rule never to leave a switched-on
machine unattended.
When the programme has stoped the
lamps flash, that shows that the program
is ready.
How to save
energy:
Economy wash
If you press the E-button, the
temperature will be lowered to
50° C in the pre-wash and the
main wash. To compensate the
lower temperature, the main
wash time is pro-longed by 15
minutes. Detergents with
enzymes work better by longer
washing times at low temperatu-
res.
Wash only full loads
Save energy by not using the
machine until it is full.
Wash at lower temperatu-
res
You can lower the temperature
in main wash and rinse in the
Intensive, Strong and Normal
Water
consump.
wash programmes to 55° C. In
in litres
the Light wash programme you
can lower it to 45° C.
25
Is the machine connected
21,5
to a cold water supply?
If the machine is connected to a
16,5
cold water supply, running time
will be longer, as the machine
16,5
must heat the water. However,
the longer washing time means
16,5
that you can run the programme
at a lower temperature and still
16,5
get the same wash performan-
ce. You also save electricity.
15
Long programmes with low
15
temperature is suitable for
detergents with emzyms.
3,5
Select unheated drying
3,5
If you select unheated drying,
the dishes will dry a little more
-
slowly. You can speed up
drying by opening the door a
little to allow the moist air to
escape. You can also select fan
drying.
7