Asko D1796FI Planning And Design Manual - Page 9

Browse online or download pdf Planning And Design Manual for Dishwasher Asko D1796FI. Asko D1796FI 15 pages. Standard dishwashers
Also for Asko D1796FI: Use And Care Manual (12 pages), Quick Start Manual (2 pages), Installation And Customization (4 pages), Planning And Design Manual (19 pages), Use And Care Manual (12 pages), Installation Instructions Manual (14 pages)

D1796FI AND D1996FI CUSTOM PANEL INSTALLATION OPTIONS

4-INCH TOE KICK INSTALLATIONS
Custom panels the same height as the
dishwasher door
If the custom panel is the same height as the dishwasher door, a 2"
decorative fill strip or pull-out cutting board must be used to fill the
area between the panel and the counter top (as illustrated below).
2" decorative fill strip or cutting board
597 mm
4-inch toe kick
Custom panels that extend to cabinet top
Another installation option for a 4" toe kick is to extend the
custom panel to the cabinet top (as illustrated below), which
eliminates the need for a decorative fill strip. A one-piece custom
door panel with a curved handle is available for 4-inch toe kick
installations (see page 12).
Panel extends from toe kick to cabinet top.
23-1/2"
597 mm
4-inch toe kick
NOTE: If the cutout is 24" wide, the custom panel can be
23-3/4" wide.
Specifications are subject to change without notice. See installation instructions for additional details.
23-1/2"
ASKO D
With a 4-inch toe kick installation, the
door panel extends 2 inches above the
control panel, as illustrated.
If you install the door panel to reach the cabinet top, we
recommend that you install a 2" support strip between the upper
edge of the dishwasher and the counter to hide the top of the
dishwasher and further reduce water noise. A metal fill strip is
also available for this type of installation (see page 12).
2-inch support strip
4-inch toe kick
6-INCH TOE KICK INSTALLATIONS
For 6" toe kick installations, no decorative fill strips or support
strips are necessary.
Panel extends from toe kick to cabinet top.
ISHWASHER
1-3/4"
(44 mm)
9