Bluerock Tools SL-1.25 Operational Manual - Page 7
Browse online or download pdf Operational Manual for Power Tool Bluerock Tools SL-1.25. Bluerock Tools SL-1.25 18 pages. Seam locker
Print Page
S L - 1 . 2 5
S E A M
L O C K E R
Operations
THOROUGHLY READ THROUGH THE ENTIRE MANUAL BEFORE OPERATING THIS MACHINE!
PURPOSE
Ø
The purpose of the SL-1.25 Seam Locker is to close Pittsburgh lock joints on correspondingly pre-
machines workpieces, e.g. ventilation ducts, housings, containers, etc.
OPERATIONAL PRINCIPLES
Ø
The lock seam can be closed on straight or slightly curved contours
Ø
The machine adjusts itself automatically to the sheet thickness to be processed.
Ø
The model SL-1.25 is for locking seams 0.8mm-1.25mm ONLY.
Range of Sheet Thickness
[mm]
0.75mm-1mm
>1mm-1.25mm
Ø
The quality of the locking seam depends on the height of flange B. If B is too large or too small, the lock
seam cannot close properly.
Ø
The seam locker uses 3 stages to lock a seam as it rolls over material. Those stages are outlined below.
Note
[Gauge]
22-21 guage
0.03-0.04 in
21-18 guage
0.04-0.05 in
Picture
Height of flange
(B) [mm]
9-11
11-13
B
4
3
Chapter
Height flange