Egasky Saturn R24M Nano User Manual - Page 8

Browse online or download pdf User Manual for Wireless Access Point Egasky Saturn R24M Nano. Egasky Saturn R24M Nano 8 pages. 2.4g station

Print Page

Tips

▅ If can't log-in page, Make sure that the CPE is correctly connected with you PC, and powered on already.

Then make sure that the IP address of your PC is set in the same network segment with the CPE, which

means that the IP address of your PC should be between 192.168.188.*.

▅ CPE default segment 192.168.188.x, for ease of maintenance, not recommended modifying the default

network segment. Bridge wireless connection, at Data Link layer (Layer 2), commonly used protocol ICMP

IGMP IP (IPV4 IPV6) ARP RARP at Network layer (Layer 3). So even different network segments, it will not

affect the transmission of Layer 3 protocol. More details can search the OSI (Open System

Interconnection) ；

▅ When formation of bridging need specify a fixed frequency, could not choose Auto; if only using AP mode

can choose Auto

▅ After the CPE boot (startup need one minute), press the RESET button 15 seconds and released after,

restart CPE, the completion of initialization.

▅

Wireless parameter setting, install multiple sets of bridge at the same location, long-distance

transmission, enhance the transmission rate is very important.

For more details, please contact optimization engineer.

- 8 -