d&b audiotechnik Q Series Rigging Manual - Page 6
Browse online or download pdf Rigging Manual for Racks & Stands d&b audiotechnik Q Series. d&b audiotechnik Q Series 18 pages. Flying frame, flying adapter
Print Page
Fig. 2: Z5159 Q Flying frame
Fig. 4: Z5155 Q Hoist connector chain
a)
b)
c )
Fig. 5: Z5154 Q Rigging set
Q-Series Rigging manual
2.1.
Rigging components
Q-Series arrays suspended by the Z5159 Q Flying frame are assembled
using the following rigging components:
2.1.1. Z5159 Q Flying frame
The Z5159 Q Flying frame is designed to support arrays consisting of the
following loudspeakers:
Code
Type
Z0510
Q-SUB
Z0501
Q1
Z0507
Q7
Z0511
Q10
The weight of the Q Flying frame is 13 kg (29 lb)
7 [0.3"]
4 [0.16"]
80 [3.2"]
Fig. 3: Z5159 Q Flying frame dimensions in mm [inch]
2.1.2. Z5155 Q Hoist connector chain
The Z5155 Q Hoist connector chain is used to connect the lifting motor(s)
to the Q Flying frame using one or two 1t Shackles supplied with the
connector chain. Its length of 52 cm (20.5") allows enough space for the
hang of most 1t motor chain containers.
2.1.3. Z5154 Q Rigging set
One set is required for each Q-Series cabinet within a vertical array. The
rigging set includes the following components:
2 x Z5151 Q Splay link [a]
2 x Z5152 Q Front link [b]
8 x Z5153 Locking pins 8 mm (linked in pairs with a steel wire) [c]
(1.2EN)
Weight incl. array links
42 kg (93 lb)
23 kg (51 lb)
23 kg (51 lb)
23 kg (51 lb)
603 [23.7"]
589 [23.2"]
Page 6 of 20