d&b audiotechnik E12X-SUB Manual - Page 6

Browse online or download pdf Manual for Subwoofer d&b audiotechnik E12X-SUB. d&b audiotechnik E12X-SUB 11 pages.
Also for d&b audiotechnik E12X-SUB: Manual (8 pages)

Print Page

Faston type connector, male single PG (standard), dual PG

(optional)

Note: When the D12 is operated in "Mix TOP/SUB mode",

the SenseDrive function is only available at the output B

connector.

WR option (Weather Resistance)

A number of d&b loudspeakers are available in special options

suitable for different types of installed applications and

environmental conditions. The following options are available for

the E12X-SUB loudspeaker:

▪ Weather resistant (WR): This option is suitable for outdoor use.

The cabinets have an impact and weather protected black PCP

(Polyurea Cabinet Protection) finish.

▪ Sea water resistant (SWR): This option is suitable for outdoor

use, especially in wet and acid or salty environments.

WR cabinets are equipped with a recessed connector panel

including a Faston type connector (2 x 6.3 mm, female). A cover

plate which accepts single or dual PG cable glands (Type PG13.5

for cable diameters from 6 - 12 mm) is enclosed, as shown in the

graphic opposite.

To install the fixed connection cable, please proceed as follows:

Tools required: Screw driver (#T20).

Note: Observe the correct polarity of the cable

Brown (+) / Blue (—).

1. Insert the connection cable through the PG screwing and

connect the male connector to the female connector.

2. Push the cover plate towards the connector panel until it fits

into place.

3. Fix the cover plate to the connector panel using the four

countersunk screws.

2.3 Operation

NOTICE!

Only operate d&b loudspeakers with a correctly configured d&b

amplifier, otherwise there is a risk of damaging the loudspeaker

components.

Applicable d&b amplifiers:

D80/D20/D12/D6/10D/30D.

Standard operation

Application

Setup

E12X-SUB

E12-SUB

Cabinets per

channel

d&b E12X-SUB Manual 5.2 en