d&b audiotechnik R70 Quick Manual - Page 2

Browse online or download pdf Quick Manual for Recording Equipment d&b audiotechnik R70. d&b audiotechnik R70 2 pages. Ethernet to can interface
Also for d&b audiotechnik R70: Manual (20 pages)

Print Page

R70

Ethernet to CAN interface

Quick guide (1.1 EN)

Direct connection

To access the R70, manually assign an IP address to the PC on your

network to the same subnet as the R70.

Proceed as follows:

1. From "Start-Settings" select the "Network Connection"

associated with your network adapter.

2. Select "Internet Protocol (TCP/IP)" and click "Properties".

3. Enter a static IP address in the same subnet as the R70 by

selecting "Use the following IP address":

IP address:

192.168.1.71

Subnet mask: 255.255.255.0

4. Apply the changes by clicking "OK" and close the network

properties dialog.

To display the web interface of the R70 enter the IP address of the

R70 in the address bar of your web browser.

www.dbaudio.com

LAN network with DHCP server

The "Obtain an IP address automatically" function is enabled by

default.

Note: If a firewall is active, allow access to the UDP Port

33333 (fix) and the TCP Port 30000 (adjustable).

1. Connect the R70 to your network and an IP address is assigned

by the DHCP server.

2. Start the respective d&b software (e.g. R1 - Edit mode) and

select "CAN" from the "Extras-Options" menu.

Þ The program scans for connected interfaces and all devices

found are listed. This may take several seconds.

3. Right click on an R70 entry in the list and select "Configure

Interface" to access the R70 web interface.