Asko T700 Series Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Dryer Asko T700 Series. Asko T700 Series 2 pages. User manual use & care guide t760-t780 (use & care guide - en, fr)
Also for Asko T700 Series: Quick Start Manual (2 pages), Use And Care Manual (16 pages), Installation (1 pages)

Print Page

QUICK START PROCEDURES

Press the Power button to turn on the machine.

Load the laundry into the dryer.

Check the lint filter. Clean it, if needed.

Check that the door is clear of laundry then close it firmly. (The door won't shut if it's slammed.)

Turn the Program Control knob to the desired program (1 or 2) or drying time (90, 60, or 30 minutes).

If you select timed drying, turn the Temperature Control knob to the desired setting.

Make your program option selections (e.g., Anti-crease).

Press Start. The machine will start.

Options

Buzzer

You have the option to turn the buzzer on or off. If you turn the buzzer on, it will sound for three seconds when the

program is complete.

Anti-crease

The Anti-crease option is designed to prevent garments from becoming wrinkled if you're unable to remove them

from the dryer right away. When you select this option, after the drying program is complete the drum will continue

to rotate for three seconds every minute until the door is opened or one hour has passed. If the buzzer is on, it will

sound each time the anti-crease program activates.

Quick Cooling

This option reduces the cool-down time from 18 minutes to 9 minutes. Quick cooling can not be selected with the

Anti-crease option.

CLEANING THE LINT FILTER

Although the lint in your ASKO dryer will be minimal, the lint filter should be cleaned after each

load to ensure maximum air flow and prevent possible overheating. To clean the filter, follow the

steps below:

1. Grasp the handle and pull it toward you.

2. Remove the filter from the holder by pulling it up.

3. Open the filter and gently brush away any lint.

4. Fold the filter together and return it to the holder on the door.

5. Push the holder in until it snaps into place

NOTE:

OVERHEATING PROTECTION

The dryer has a protection device that shuts the machine off if the temperature becomes too high. Overheating could occur if the lint filter is

clogged or the fan needs to be cleaned. If the dryer shuts off during a program, check the lint filter first. If it is clean, it could be the fan needs

to be cleaned. See your Use and Care Guide for instructions on how to clean the fan.

We recommend that you clean the lint filter after every load.

T700