Ambient Weather WS-1172 User Manual - Page 2

Browse online or download pdf User Manual for Weather Station Ambient Weather WS-1172. Ambient Weather WS-1172 17 pages. Advanced weather station

Print Page

1. Introduction

Thank you for your purchase of the Ambient Weather WS-1172 Advanced Weather Station with

Temperature, Humidity, Barometer and Advanced Forecasting. The following user guide provides step

by step instructions for installation, operation and troubleshooting. To download the latest manual and

additional troubleshooting tips, please visit:

Note: The power up sequence must be performed in the order shown in this section (remote

transmitter first, Display Console second).

The WS-1172 weather station consists of a display console (receiver), and a thermo-hygrometer

(remote transmitter).

QTY

Display Console

Frame Dimensions (LxWxH): 7.25 x 4 x 1.25 in

LCD Dimensions (LxW): 4.25 x 2.50"

Thermo-hygrometer transmitter (WH2B) with mounting bracket

Dimensions (LxWxH): 3.5" x 2.5" x 0.9"



Philips precision screwdriver



Drill for mounting bracket

Note: To avoid permanent damage, please take note of the battery polarity before inserting the

batteries.

Remove the battery door on the back of the sensor with a Philips screwdriver (there is only one screw,

at the bottom of the unit). Insert two AAA batteries as shown in Figure 1 (we recommend lithium

batteries for cold weather climates, but alkaline batteries are sufficient for most climates).

Replace the battery door and set screw. Note that the temperature and humidity will be displayed on

the LCD display. Looking at the back of the unit from left to right, the polarity is (-) (+) for the top

battery and (+) (-) for the bottom battery.

Version 1.0

http://ambientweather.wikispaces.com/ws1172

Item

Page 2