Ambient Weather WS-1173A User Manual - Page 17
Browse online or download pdf User Manual for Weather Station Ambient Weather WS-1173A. Ambient Weather WS-1173A 20 pages. Advanced weather station
![Ambient Weather WS-1173A User Manual](/uploads/products/server2/995632/995632.jpg)
Update Rate: 48 seconds
6.2 Measurement Specifications
The following table provides specifications for the measured parameters.
Measurement
Indoor Temperature
Outdoor Temperature
Indoor Humidity
Outdoor Humidity
Barometric Pressure
6.3 Power Consumption
Base station : 3 x AA 1.5V Alkaline batteries
Remote sensor : 2 x AAA 1.5V Alkaline batteries
Battery life: Minimum 12 months for base station
Minimum 24 months for thermometer-hygrometer sensor (use lithium batteries in cold
weather climates)
7. Troubleshooting Guide
If your question is not answered here, you can contact us as follows:
1. Email Support:
2. Live Chat Support:
3. Technical Support: 480-346-3380 (M-F 8am to 4pm Arizona Time)
Problem
Wireless remote (thermo-hygrometer) not
reporting in to console.
There are dashes (--) on the display
console.
Version 1.0
©Copyright 2012, Ambient LLC. All Rights Reserved.
Range
32 to 140 °F
-40 to 149 °F
1 to 99 %
20 to 95%
8.85 to 32.50 inHg
www.ambientweather.com/chat.html
Solution
1. Resync the unit. Press and hold the
2. Check the remote sensor is powered up and
3. Install a fresh set of batteries in the remote
4. The maximum line of sight communication
5. If the sensor assembly is too close (less than
6. Make sure the remote sensors are not
Accuracy
± 2 °F
± 2 °F
± 5%
± 5%
± 0.08 inHg (within
range of 27.13 to 32.50
inHg)
(M-F 8am to 4pm Arizona Time)
10 seconds to resynchronize. The remote sensor
search icon
will turn on. Wait several
minutes for the remote sensor to report in, or the
search icon to turn off. Do not press any buttons
while in the search mode.
displaying the temperature and humidity on the
LCD display.
thermo-hygrometer. For cold weather
environments, install lithium batteries.
range is 300'. Move the sensor assembly closer
to the display console.
5-10'), move the sensor assembly away from the
display console.
transmitting through solid metal (acts as an RF
Resolution
0.1 °F
0.1 °F
1 %
1 %
0.01 inHg
+
key for
Page 17