Ambient Weather WS-0802 User Manual - Page 4
Browse online or download pdf User Manual for Thermometer Ambient Weather WS-0802. Ambient Weather WS-0802 15 pages. 8-channel wireless thermometer with min/max display
Print Page
3. Channel Number: The sensor supports up to eight transmitters. To set each channel number
(the default is Channel 1), change Dip Switches 1, 2 and 3, as referenced in Table 1.
4. Temperature Units of Measure: To change the transmitter display units of measure (°F vs.
°C), change Dip Switch 4, as referenced in Table 1.
1
DOWN
DOWN
DOWN
DOWN
UP
UP
UP
UP
---
---
5. Insert two AAA batteries.
6. After inserting the batteries, the remote sensor LED indicator will light for 4 seconds, and
then flash once per 60 seconds thereafter. Each time it flashes, the sensor is transmitting data.
7. Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on
the display, as shown in Figure 3.
Version 1.0
©Copyright 2017, Ambient LLC. All Rights Reserved.
Figure 2
DIP SWITCH
2
3
DOWN
DOWN
DOWN
UP
UP
DOWN
UP
UP
DOWN
DOWN
DOWN
UP
UP
DOWN
UP
UP
---
---
---
---
Table 1
FUNCTION
4
---
Channel 1
---
Channel 2
---
Channel 3
---
Channel 4
---
Channel 5
---
Channel 6
---
Channel 7
---
Channel 8
DOWN
°F
UP
°C
Page 4