Ambient Weather WS-2063 User Manual - Page 3

Browse online or download pdf User Manual for Measuring Instruments Ambient Weather WS-2063. Ambient Weather WS-2063 6 pages. Indoor temperature and humidity monitor with backlight

Print Page
No
Description
- Plug in the optional probe to measure
the probe temperature.

2.2 Parts List

QTY
1
Monitor
Frame Dimensions: 2.8(W) x 4.05(H) x 1.06(D) in
1
User Manual

2.3 Powering Up

1. Remove the battery door on the top of the monitor and insert 2 new AA batteries, according to
the polarity information marked on the battery compartment, and replace the battery door.
2. Once the batteries are inserted, all of the LCD segments will light up briefly.
3. The 24 hour timer will begin for resetting the minimum and maximum temperature and
humidity.
4. Allow a few minutes for temperature to stabilize, and approximately 20 minutes for the
humidity to stabilize.

3. Monitor Display

3.1 Temperature Display

When you plug in the optional temperature probe, the display will automatically switch to the probe
temperature.
When the temperature is below -40°F, the icon LO appears on display.
When the temperature is above 158°F, the icon HI appears on display.

3.2 Humidity Display

The house humidity icon identifies high and low humidity conditions.
When the relative humidity is less than 30%, LOW is displayed.
When the relative humidity is between 30% and 50%, this is considered in the good range.
When the humidity is greater than 50%, HIGH is displayed.
Version 1.0
©Copyright 2016, Ambient LLC. All Rights Reserved.
No
Item
Figure 2
Description
Page 3