Ambient Weather WS-8365 User Manual - Page 5

Browse online or download pdf User Manual for Alarm Clock Ambient Weather WS-8365. Ambient Weather WS-8365 12 pages. Clearview projection alarm clock with indoor temperature and outdoor temperature

Print Page

4. Once the wireless transmitter has synced up to the clock, you can place the sensor outside.

Note: If no display is present after powering up the clock, press the reset button on the back of the

clock with an open ended paper clip or sharp tool.

3.4 Siting the Wireless Transmitter Outside

It is recommended you place the remote sensor in a shaded area.

Direct sunlight and radiant heat sources will result in inaccurate temperature readings. Although the

sensor is weatherproof, it is best to mount in a well-protected area, such as an eve. Do not place in

standing water or snow.

Wireless signals are impacted by distance, interference (other wireless devices, wireless phones,

wireless routers, TVs and computer monitors), and transmission barriers, such as walls. In general,

wireless signals will not penetrate solid metal and earth (down a hill, for example).

The following is a table of reception loss vs. the transmission medium. Each "wall" or obstruction

decreases the transmission range by the factor shown below.

Medium

Glass (untreated)

Plastics

Wood

Brick

Concrete

Metal

Version 1.3

RF Signal Strength Reduction

5-15%

10-15%

10-40%

40-80%

90-100%

Page 5